Amazon's Choice

DEWALT DW1602 1/8-Inch x 12-Inch Black Oxide Drill Bit Review 2026: Is it Worth It?

4.6
405
50+ Bought last month
Current Price $13.29
DEWALT DW1602 1/8-Inch x 12-Inch Black Oxide Drill Bit
7.3
Expert Score

Quick Analysis Verdict

"Aimed at tradespeople needing a deep-reach steel/wood bit that starts clean and ejects chips reliably; not for masonry, high-speed carbide replacement, or heavy-duty stainless work."

Value: 8.0/10 Ranked #1 in Power & Hand Tools
*Prices and availability are accurate as of Nov 20, 18:56 ET and are subject to change.

As an Amazon Associate we earn from qualifying purchases

Review Methodology

Why this analysis may help before you buy

4.6

Rating signal

We weigh star rating together with 405 visible reviews so a rating is not judged in isolation.

50+

Buyer momentum

Recent purchase activity and category badges help us identify products shoppers are actively considering.

7.3/10

RefreshBuy score

The score combines performance, quality, value, and ease-of-use signals for this category.

Decision Guide

Is DEWALT DW1602 1/8-Inch x 12-Inch Black Oxide Drill Bit a good fit for you?

For shoppers comparing Power & Hand Tools products, this DEWALT option looks strongest on value with a 8.0/10 signal. The main area to double-check is performance, especially if that is your top priority.

Best For

Deep-through drilling in mild steel, aluminum, and wood where a split-point, long-reach bit prevents walking and clears chips.

Evidence

limited-but-useful review coverage, 4.6/5 rating, and 50+ recent monthly purchases.

Value Read

Value score 8.0/10 at $13.29 current tracked price.

Choose it if

You want a Power & Hand Tools pick where the strongest measurable signal is value and the current review base is large enough to compare with alternatives.

Compare alternatives if

Your buying decision depends mostly on performance, long-term durability, or a lower final checkout price after marketplace changes.

Before buying

Check both Amazon Canada and Amazon US from this detail page, then compare similar Power & Hand Tools products below before deciding.

Best Application

Deep-through drilling in mild steel, aluminum, and wood where a split-point, long-reach bit prevents walking and clears chips.

Investment Value

Great Value

Durability Index

Moderate to high for routine metal and woodworking tasks (many dozens to hundreds of holes); reduced life with hardened stainless or abrasive materials and if stored wet.

Key Buying Points

✓

135° split point: Starts on contact and minimizes walking so holes begin true without pilot marks or punch.

✓

Parabolic flute geometry: Aggressive chip clearance reduces clogging when drilling long holes in metal and wood.

✓

Black oxide coating: Adds wear resistance and reduces friction for longer life versus bare steel bits in general-purpose use.

✓

Extra-long 12-inch length: Enables deep-hole drilling in panels, frames, and through-structures where standard lengths fall short.

✓

Controlled helix profile: The moderate helix reduces over-aggressiveness for steadier feeds and less bit wander on thin materials.

✓

Round shank compatibility: Works with standard chucks and many drill drivers for broad fitment across workshops and job sites.

✓

Balanced for hand and bench drills: Long form factor with chip ejection tuned for portable drilling without excessive binding.

The Catch

!

Long length increases flex: The 12-inch profile can vibrate or deflect in thin material or at high RPM, reducing accuracy.

!

Not intended for masonry: Carbide or masonry bits are required for concrete, brick, or tile — this steel bit will blunt quickly.

!

Limited corrosion protection: Black oxide improves wear but is not a corrosion barrier; it can rust if stored wet or exposed.

!

Round shank slippage risk: In worn keyless chucks or under high torque the round shank may slip compared with reduced or hex shanks.

!

Suboptimal on hard stainless: For prolonged stainless work a cobalt or carbide option is preferable; this bit will dull faster.

Performance Scorecard

Performance 7.0
Quality 7.0
Value 8.0
Ease of use 7.0

Common Questions & Expert Insights

Q: Will this bit drill stainless steel effectively? ▼
Not optimally — it's usable but not ideal for stainless. The DW1602 can penetrate stainless if fed slowly with frequent clearing, but heat buildup will accelerate wear; cobalt alloy or dedicated stainless bits are better for repeated stainless work.
Q: Can I use this bit in a cordless drill/driver? ▼
Yes — it fits most standard chucks on cordless drills. The round shank accepts keyed and keyless chucks, but ensure your drill has enough torque and use a steady low-to-moderate speed to avoid flex or slippage.
Q: Is this suitable for drilling concrete or masonry? ▼
No — it's not for masonry. This is a high-speed steel black-oxide twist bit optimized for metal and wood; masonry requires carbide-tipped masonry bits or SDS hammer bits.
Q: Will the 12-inch length reduce accuracy or increase breakage? ▼
It can reduce rigidity and accuracy compared with shorter bits. Extra reach increases the chance of deflection and vibration; clamp the workpiece, support the bit where possible, and use low RPM to maintain straight holes.
Q: How does the 135° split point matter in practice? ▼
It improves centering and reduces walking on contact. The split point bites immediately so you don't need a pilot hole in many metals and reduces the need for a center punch on thin stock.
Q: What materials is this bit best for? ▼
Best for mild/soft steels, aluminum, and wood. The parabolic flute and coating are tuned for metal and wood chip evacuation; avoid abrasive or hardened materials for long life.
Q: How should I clean and maintain this drill bit? ▼
Wipe and oil after use to prevent corrosion. Remove chips, dry the bit, and apply a light oil before storage; avoid leaving it in humid environments to preserve the black oxide finish.
Q: Can this bit be resharpened when dull? ▼
Yes — it can be resharpened on a bench grinder by a skilled operator. Maintain the original split-point geometry and flute clearance when sharpening to preserve start and chip ejection performance.
Q: How does this compare to TiN-coated bits? ▼
Black oxide vs TiN: black oxide offers wear resistance but less lubricity. TiN typically lasts longer under friction and can offer higher life, but black oxide remains a cost-effective, widely compatible option for general use.
Q: Is this better or worse than cobalt alloy bits? ▼
Worse for hard alloys, comparable for common steels and wood. Cobalt bits retain hardness at higher temperatures and outlast HSS black-oxide on stainless and hardened steels; for general shop use this DEWALT HSS bit is more economical.

You May Also Like

Top-rated alternatives in Power & Hand Tools

View All →