Amazon's Choice

ERYONE Silk PLA 1.75mm 1KG Shiny Silk Silver High Gloss Review 2026: Is it Worth It?

4.4
5,265
Current Price $26.99
List: $28.41 5% OFF
ERYONE Silk PLA 1.75mm 1KG Shiny Silk Silver High Gloss
7.5
Expert Score

Quick Analysis Verdict

"Ideal for hobbyists and designers who want high-gloss decorative prints; not recommended for functional, load-bearing or outdoors-exposed parts."

Value: 8.0/10 Ranked #1 in 3D Printing & Scanning
*Prices and availability are accurate as of Nov 20, 17:51 ET and are subject to change.

As an Amazon Associate we earn from qualifying purchases

Review Methodology

Why this analysis may help before you buy

4.4

Rating signal

We weigh star rating together with 5,265 visible reviews so a rating is not judged in isolation.

Tracked

Buyer momentum

Recent purchase activity and category badges help us identify products shoppers are actively considering.

7.5/10

RefreshBuy score

The score combines performance, quality, value, and ease-of-use signals for this category.

Decision Guide

Is ERYONE Silk PLA 1.75mm 1KG Shiny Silk Silver High Gloss a good fit for you?

For shoppers comparing 3D Printing & Scanning products, this ERYONE option looks strongest on performance with a 8.0/10 signal. The main area to double-check is quality, especially if that is your top priority.

Best For

High-gloss decorative prints and small art pieces where surface finish and visual shimmer are primary goals.

Evidence

very broad review coverage, 4.4/5 rating, and no strong recent purchase momentum signal available.

Value Read

Value score 8.0/10 at $26.99 with 5% savings.

Choose it if

You want a 3D Printing & Scanning pick where the strongest measurable signal is performance and the current review base is large enough to compare with alternatives.

Compare alternatives if

Your buying decision depends mostly on quality, long-term durability, or a lower final checkout price after marketplace changes.

Before buying

Check both Amazon Canada and Amazon US from this detail page, then compare similar 3D Printing & Scanning products below before deciding.

Best Application

High-gloss decorative prints and small art pieces where surface finish and visual shimmer are primary goals.

Investment Value

Great Value

Durability Index

Moderate — good for display and decorative use, but PLA material limits outdoor/structural longevity; some batches show brittle behavior which shortens life for stressed parts.

Key Buying Points

✓

Reliable diameter control (±0.03mm spec) that yields consistent extrusion across Bowden and direct-drive setups, producing smooth surfaces with minimal dimensional variation.

✓

Formulated silk finish gives a high-gloss, metallic-like sheen that reduces visible layer lines on decorative models—excellent for vases, busts and display pieces.

✓

Prints well across a broad PLA temperature window (190–220°C), allowing easy tuning: lower speeds and smaller layer heights markedly improve shine and detail.

✓

Supplied vacuum-sealed with desiccant on most rolls, reducing moisture-related printing defects straight out of the bag when the seal is intact.

✓

Good toughness for a silk PLA—handles fine features without excessive brittleness in most batches, enabling detailed prints and small ornaments.

✓

Low internal contamination (reports of few bubbles/dust) and generally clean extrusion that minimizes nozzle clogs when spool is properly wound.

✓

Compatible with common build surfaces (PEI, glass with adhesive) and adhesives; adheres well without special primer for typical hobby prints.

✓

Wide color / finish selection in the line makes it easy to pick tones for multi-piece assemblies and artistic projects.

The Catch

!

Inconsistent spool winding on some batches — several users reported loops/crossing that caused knots and lost prints unless unwound and re-spooled.

!

Occasional brittleness reported — some rolls printed brittle like 'sugar', indicating batch-to-batch variability in filament toughness.

!

Vacuum seal failures have been noted; while desiccant is usually present, a broken seal increases the risk of moisture-related issues if not dried before use.

!

Slight color/finish variance versus product images — silk sheen can look less vibrant on complex models or at certain angles.

!

Mild stringing in some conditions — requires tuning retraction and temperature to eliminate fine hairs on prints.

Performance Scorecard

Performance 8.0
Quality 7.0
Value 8.0
Ease of use 7.0

Common Questions & Expert Insights

Q: Is this filament suitable for load-bearing or functional mechanical parts? ▼
No, not recommended for load-bearing parts. Silk PLA is optimized for aesthetic finish rather than mechanical strength; PLA in general has lower impact and heat resistance than PETG/ABS, and some batches of silk PLA can exhibit brittleness—use engineering filaments for structural applications.
Q: Will this filament jam my nozzle or cause frequent clogs? ▼
Generally no, but spool condition matters. The material itself extrudes cleanly when diameter tolerance is maintained, but poor winding (knots/crossing) on some spools has led to feed interruptions; inspect and rewind if needed and keep nozzle clearance and temperature dialed in.
Q: Can I print this on a Bowden-style printer without issues? ▼
Yes, Bowden printers can handle it. The 1.75mm diameter and claimed tolerance are compatible with both Bowden and direct-drive systems; reduce retraction distance and slow speeds slightly if refraction-driven stringing appears.
Q: What nozzle and bed settings produce the best silk shine? ▼
Lower speed and small layer heights deliver the best gloss. Users report 190–220°C nozzle range works; for maximum sheen use finer layers and slower print speeds to allow smooth bead formation—adjust retraction to control stringing.
Q: Will the spool work with standard 57mm cores and my printer spool holder? ▼
Yes, it uses a standard-sized spool. The spool dimensions are within common hobby standards (57mm inner), so it fits most consumer printer holders; check winding before long prints to avoid tangles.
Q: Is this filament compatible with printers like Bambu Lab and Creality out of the box? ▼
Yes, often runs on default PLA profiles. Multiple reports show successful prints on Bambu Lab and Creality machines using stock PLA settings; minor tuning for retraction and temperature may improve finish.
Q: How should I store leftover filament to keep it printable? ▼
Keep it dry in sealed packaging with desiccant. The spool can absorb moisture if the vacuum seal is broken; store in airtight bags with fresh desiccant or a filament dry box to avoid popping and poor layer adhesion.
Q: Can I post-process prints made with this silk PLA (sanding/painting)? ▼
Yes, but sanding reduces the silk sheen. The glossy surface sands to a duller finish—if you want painted or sanded parts, consider priming first or accept loss of silk effect; vapor smoothing is not effective on PLA.
Q: How does ERYONE Silk PLA compare to standard matte PLA for display pieces? ▼
Silk PLA provides a clearly superior surface sheen. For decorative and display prints the silk formulation hides layer lines and offers a metallic-like gloss compared with matte PLA, but it sacrifices some mechanical resilience.
Q: Is ERYONE Silk PLA noticeably different from other silk filaments like Polymaker/Prusament? ▼
Comparable finish, with more batch variability. ERYONE delivers a strong silk appearance at a competitive price; finish is similar to premium silk brands, though users report occasional inconsistencies in winding and brittleness that are less common in top-tier brands.

You May Also Like

Top-rated alternatives in 3D Printing & Scanning

View All →