RCINDUS M35 Cobalt 1/8in (20PC) Metal Drill Bit Set Review 2026: Is it Worth It?

4.4
931
100+ Bought last month
Current Price $11.99
RCINDUS M35 Cobalt 1/8in (20PC) Metal Drill Bit Set
7.8
Expert Score

Quick Analysis Verdict

"Best for DIYers, machinists, and metalworkers who need a cost-effective pack of M35 cobalt 1/8-inch bits for stainless and hardened metals; not for users who need multiple sizes or bits for impact/hammer applications."

Value: 8.0/10 Ranked #1 in Power & Hand Tools
*Prices and availability are accurate as of Nov 20, 18:47 ET and are subject to change.

As an Amazon Associate we earn from qualifying purchases

Review Methodology

Why this analysis may help before you buy

4.4

Rating signal

We weigh star rating together with 931 visible reviews so a rating is not judged in isolation.

100+

Buyer momentum

Recent purchase activity and category badges help us identify products shoppers are actively considering.

7.8/10

RefreshBuy score

The score combines performance, quality, value, and ease-of-use signals for this category.

Decision Guide

Is RCINDUS M35 Cobalt 1/8in (20PC) Metal Drill Bit Set a good fit for you?

For shoppers comparing Power & Hand Tools products, this RCINDUS option looks strongest on performance with a 8.0/10 signal. The main area to double-check is quality, especially if that is your top priority.

Best For

Small-diameter production or maintenance drilling in stainless steel, cast iron, and other hard metals where many identical holes are required.

Evidence

limited-but-useful review coverage, 4.4/5 rating, and 100+ recent monthly purchases.

Value Read

Value score 8.0/10 at $11.99 current tracked price.

Choose it if

You want a Power & Hand Tools pick where the strongest measurable signal is performance and the current review base is large enough to compare with alternatives.

Compare alternatives if

Your buying decision depends mostly on quality, long-term durability, or a lower final checkout price after marketplace changes.

Before buying

Check both Amazon Canada and Amazon US from this detail page, then compare similar Power & Hand Tools products below before deciding.

Best Application

Small-diameter production or maintenance drilling in stainless steel, cast iron, and other hard metals where many identical holes are required.

Investment Value

Great Value

Durability Index

Moderate to long for intermittent professional use; longevity depends strongly on correct speeds, coolant use, and avoiding impact/hammer tools.

Key Buying Points

✓

M35 Cobalt Alloy (5% cobalt) — real-world benefit: cuts and stays sharp longer in stainless and cast iron versus standard HSS, reducing frequent bit changes during metalwork.

✓

135° Split-Point Geometry — technical effect and user benefit: self-centers and resists walking on hard surfaces, making hand-held drilling more accurate with fewer pilot steps.

✓

Precision Ground Flutes — manufacturing detail and result: tighter diameter tolerance and cleaner chip evacuation, yielding more consistent hole quality in thin sheet and plate.

✓

Straight Shank Design — practical compatibility: fits standard 3-jaw chucks and drill presses without adapters, simplifying swaps between tools on the job.

✓

Bulk 20-Piece Same-Size Pack — field advantage: plentiful reserve bits for production runs or consumable-heavy projects, lowering downtime from dull/broken bits.

✓

Factory-Hardened & Finished — longevity note: tempered and ground for wear resistance, so users see longer life under proper speeds and coolant use compared to generic HSS bits.

✓

Plastic Storage Case — organization benefit: keeps bits protected and accessible on the bench, reducing time lost searching for replacements.

The Catch

!

Single-Size Only — the set includes only 1/8in bits, so you still need additional sizes for general-purpose work or pilot-to-final-drilling workflows.

!

Not Impact-Rated — these are not designed for impact drivers or hammer drilling; misuse will increase breakage risk and void expected life benefits.

!

Case and Labeling Basic — the included plastic case is utilitarian and can allow loose movement if not secured; bit ID markings are minimal and may wear.

!

Requires Proper Technique — to realize M35 advantages you must use reduced speeds, cutting fluid, and pecking on thick stainless; otherwise wear escalates quickly.

!

Variable Finish/Quality Tolerance — low-cost factory runs sometimes show minor tip chipping or inconsistent coating on a small percentage of bits; inspect before use.

Performance Scorecard

Performance 8.0
Quality 7.0
Value 8.0
Ease of use 8.0

Common Questions & Expert Insights

Q: Can these drill stainless steel effectively? ▼
Yes — M35 cobalt is suitable for stainless steel. The 5% cobalt formulation (M35) and split-point geometry let these bits cut harder alloys with better heat resistance than standard HSS. For best results use moderate speeds, cutting fluid, and peck drilling on thicker sections to avoid tempering and premature wear.
Q: Will these bits fit in a standard hand drill chuck? ▼
Yes — the straight 1/8in shank fits standard chucks. These bits are straight-shank twist bits designed for conventional 3-jaw chucks on cordless or corded drills and drill presses; secure the shank fully in the chuck to minimize runout.
Q: Are these suitable for use in an impact driver or hammer drill? ▼
No — avoid impact or hammer modes. They are precision twist bits, not impact-rated driver bits; repeated percussive loading will increase chipping and breakage. Use a standard drill or drill press for best life and hole quality.
Q: Do these bits require special speeds or coolant? ▼
Yes — reduced speed and cutting fluid are recommended. Cobalt tolerates heat better, but longevity improves significantly with lower surface speeds when drilling hard metals and using a lubricant or cutting oil to control heat and flush chips.
Q: Can I resharpen these drill bits when they dull? ▼
Yes — they can be resharpened by a skilled operator. M35 cobalt can be reground on a proper bench grinder or tool grinder, but small-diameter bits require a steady hand or jig; improper resharpening risks geometry changes and reduced life.
Q: Will these bits break easily in a cordless drill? ▼
They are durable but not indestructible — correct technique is essential. Use steady feed, avoid excessive side pressure, and stop to clear chips. Most breakage in the field comes from user technique (side loading, high speed without coolant), not from the alloy alone.
Q: How do I maintain these bits to maximize life? ▼
Keep them cool, clear chips, and avoid sideways loads. Apply cutting fluid on hard metals, use peck cycles for deep holes, and periodically check for tip wear; replace or resharpen before significant radius builds at the tip.
Q: What’s the best storage method to avoid damage? ▼
Store them in the provided case and avoid loose transport. Keep bits separated so tips can't rub or chip; for long-term storage add a light oil film to prevent corrosion if in humid environments.
Q: How do these compare to titanium-coated HSS bits? ▼
Cobalt bits outperform TiN-coated HSS on hard metals. Titanium coatings improve surface lifespan on softer steels, but cobalt alloy retains hardness at higher temperatures and is a better choice for stainless, cast iron, and high-wear applications.
Q: Is buying a 20-piece single-size pack better than a mixed-size premium set? ▼
It depends on your needs: quantity over variety. A 20-piece same-size pack is excellent for repetitive work and lowers per-bit cost; if you need multiple diameters for pilots or a wider range of tasks, a mixed premium set is more flexible.

You May Also Like

Top-rated alternatives in Power & Hand Tools

View All →