★ #1 Best Seller

SALI M35 Cobalt Step Drill Bit Set, 12 Sizes 3/16–7/8" Review 2026: Is it Worth It?

4.4
280
100+ Bought last month
Current Price $19.99
SALI M35 Cobalt Step Drill Bit Set, 12 Sizes 3/16–7/8"
7.0
Expert Score

Quick Analysis Verdict

"Good choice for DIYers and light-professional sheet-metal work that need affordable M35/TiAlN step bits; avoid if you need industrial continuous heavy-duty cutting or guaranteed long-term shop durability."

Value: 7.0/10 Ranked #1 in Cutting Tools
*Prices and availability are accurate as of Nov 20, 17:57 ET and are subject to change.

As an Amazon Associate we earn from qualifying purchases

Review Methodology

Why this analysis may help before you buy

4.4

Rating signal

We weigh star rating together with 280 visible reviews so a rating is not judged in isolation.

100+

Buyer momentum

Recent purchase activity and category badges help us identify products shoppers are actively considering.

7.0/10

RefreshBuy score

The score combines performance, quality, value, and ease-of-use signals for this category.

Decision Guide

Is SALI M35 Cobalt Step Drill Bit Set, 12 Sizes 3/16–7/8" a good fit for you?

For shoppers comparing Cutting Tools products, this SALI option looks strongest on ease of use with a 8.0/10 signal. The main area to double-check is quality, especially if that is your top priority.

Best For

Fast, clean hole expansion in thin-to-moderate sheet metal (stainless, aluminum, copper), plastics and wood for maintenance, sink/counter installs, and light fabrication.

Evidence

limited-but-useful review coverage, 4.4/5 rating, and 100+ recent monthly purchases.

Value Read

Value score 7.0/10 at $19.99 current tracked price.

Choose it if

You want a Cutting Tools pick where the strongest measurable signal is ease of use and the current review base is large enough to compare with alternatives.

Compare alternatives if

Your buying decision depends mostly on quality, long-term durability, or a lower final checkout price after marketplace changes.

Before buying

Check both Amazon Canada and Amazon US from this detail page, then compare similar Cutting Tools products below before deciding.

Best Application

Fast, clean hole expansion in thin-to-moderate sheet metal (stainless, aluminum, copper), plastics and wood for maintenance, sink/counter installs, and light fabrication.

Investment Value

Fair

Durability Index

Moderate — durable for intermittent professional or frequent DIY use thanks to M35/TiAlN, but expectancy drops under heavy continuous use; inspect for chipping and avoid overheating.

Key Buying Points

✓

M35 Cobalt HSS core provides better heat tolerance and edge retention than plain HSS, letting you cut thin stainless and harder alloys with less tempering at higher speeds.

✓

TiAlN (Titanium Aluminum Nitride) surface coating raises surface hardness and thermal resistance, reducing wear and allowing faster cuts on metal without rapid blunting.

✓

Multi (spiral) flute geometry yields faster chip evacuation and smoother hole finishes compared with single-land step bits — users report 'buttery' cutting on sinks and thin sheet metal.

✓

1/4" hex shank fits quick-change chucks and cordless drivers securely, so you can swap bits quickly and reduce slippage during high-torque starts.

✓

Twelve-step coverage (3/16"–7/8") removes need for multiple drills for common hole sizes; compact/short profile helps avoid drilling through the far side in tight tubing or assemblies.

✓

Works across materials—stainless, aluminum, copper, plastics, and wood—making it versatile for trades, home renovation, and automotive trim work.

✓

Four-blade spiral design and TiAlN combo cut cleaner holes with less burr on thin materials; many users reported clean cuts in wood and stainless sinks with minimal finishing.

✓

Affordable price-to-performance ratio for occasional pros and serious hobbyists who want cobalt performance without premium-brand pricing.

The Catch

!

Durability is inconsistent—several reports of premature chipping or breakage under heavy or continuous use compared with premium brands.

!

Some steps are shallower, so larger hole sizes may require drilling from both sides or pre-drilling/finishing with a file for thicker materials.

!

Spiral flute geometry can grab and rotate small workpieces or thin sheet held by hand—use clamps and proper feeds to avoid injury.

!

Not engineered for prolonged industrial duty; expect reduced lifespan when used continuously on hot-rolled heavy steel or very thick stainless.

!

Quality control variability—some customers receive flawless bits while others report immediate failure on first use.

Performance Scorecard

Performance 7.0
Quality 6.0
Value 7.0
Ease of use 8.0

Common Questions & Expert Insights

Q: Will these step bits cut through stainless steel reliably? ▼
Yes — they will cut thin stainless reliably when used correctly. The M35 cobalt substrate combined with a TiAlN surface increases heat resistance and edge life, so these bits handle typical thin stainless sink and sheet tasks (around 1/8" / ~3mm). For thicker or annealed stainless expect slower progress, possible step blunting, and in some cases the need to approach the hole from both sides.
Q: Are these suitable for continuous professional shop use? ▼
No — they are not optimized for heavy continuous industrial use. While M35 and TiAlN improve durability, real-world reviews show variability and occasional breakage under prolonged high-load use; premium-brand solid-cobalt or dedicated industrial step bits remain the safer choice for nonstop production environments.
Q: Could the spiral flutes pull my workpiece or cause a safety hazard? ▼
Yes — spiral flutes can exert axial pulling force that may rotate small or unsecured pieces. The multi-flute geometry improves chip removal and finish but increases grab; always clamp work securely and use appropriate feed speed to prevent spinning of thin sheet or small parts.
Q: Will the 1/4" hex shank work in my cordless drill and quick-change chuck? ▼
Yes — the 1/4" hex shank is compatible with most cordless drills and quick-change systems. The hex profile reduces slippage in high-torque starts; however, avoid excessive impact-mode use and ensure the drill's chuck fully seats the hex for best torque transfer.
Q: Can I use these in a drill press for cleaner holes? ▼
Yes — a drill press improves control and hole quality. Using a drill press reduces wandering and lets you apply consistent feed and coolant, which is especially useful for larger steps and harder materials; watch depth so the shorter profile doesn't bottom out prematurely.
Q: Are these safe to use with an impact driver or impact wrench? ▼
No — impact tools are not recommended. Step bits rely on steady rotational speed and controlled feed; repeated impact blows can stress the bit and its hex shank, increasing the risk of fracture and poor finish.
Q: How should I maintain and prolong these step bits? ▼
Use cutting oil, controlled speeds, and avoid overheating. Regularly apply a metal cutting lubricant on stainless and harder alloys, run at recommended speeds for the material, and back out to clear chips; store bits in a case to prevent knocks that can chip the cutting edge.
Q: Can I re-sharpen these bits when they dull? ▼
Yes — re-sharpening is possible but not trivial. The coated TiAlN surface and multiple step geometries require a bench grinder or professional resharpening to restore cutting edges without removing the coating; for many users replacement is more cost-effective than precision resharpening.
Q: How do these compare to cheaper uncoated HSS step bits? ▼
They outperform plain HSS in heat resistance and edge life. The M35 cobalt core plus TiAlN coating keeps the edge sharper longer and lets you cut harder materials and at faster speeds than uncoated HSS, delivering fewer passes and cleaner holes for marginally higher cost.
Q: Are these as durable as premium brand step bits (Milwaukee/Irwin/etc.)? ▼
Not consistently — premium brands typically offer more reliable longevity. While SALI's M35/TiAlN combo closes the performance gap and is a strong budget alternative, reviews indicate occasional QC issues and less predictable life under heavy use compared with established premium makers.

You May Also Like

Top-rated alternatives in Cutting Tools

View All →