Amazon's Choice

3DHoJor PLA+ 1.75mm Filament — Cardboard Spool, 1kg Review 2026: Is it Worth It?

4.3
3,715
50+ Bought last month
Current Price $25.99
3DHoJor PLA+ 1.75mm Filament — Cardboard Spool, 1kg
7.5
Expert Score

Quick Analysis Verdict

"Best for hobbyists and prototypers who want a matte, higher-strength PLA that prints reliably; not ideal for users who cannot tolerate any spool tangles or need chemical-resistant PETG parts."

Value: 8.0/10 Ranked #1 in 3D Printing & Scanning
*Prices and availability are accurate as of Nov 20, 18:46 ET and are subject to change.

As an Amazon Associate we earn from qualifying purchases

Review Methodology

Why this analysis may help before you buy

4.3

Rating signal

We weigh star rating together with 3,715 visible reviews so a rating is not judged in isolation.

50+

Buyer momentum

Recent purchase activity and category badges help us identify products shoppers are actively considering.

7.5/10

RefreshBuy score

The score combines performance, quality, value, and ease-of-use signals for this category.

Decision Guide

Is 3DHoJor PLA+ 1.75mm Filament — Cardboard Spool, 1kg a good fit for you?

For shoppers comparing 3D Printing & Scanning products, this 3DHoJor option looks strongest on performance with a 8.0/10 signal. The main area to double-check is quality, especially if that is your top priority.

Best For

Printing aesthetic display models and functional prototypes that benefit from a matte finish and stronger-than-PLA toughness on common FDM machines.

Evidence

strong review coverage, 4.3/5 rating, and 50+ recent monthly purchases.

Value Read

Value score 8.0/10 at $25.99 current tracked price.

Choose it if

You want a 3D Printing & Scanning pick where the strongest measurable signal is performance and the current review base is large enough to compare with alternatives.

Compare alternatives if

Your buying decision depends mostly on quality, long-term durability, or a lower final checkout price after marketplace changes.

Before buying

Check both Amazon Canada and Amazon US from this detail page, then compare similar 3D Printing & Scanning products below before deciding.

Best Application

Printing aesthetic display models and functional prototypes that benefit from a matte finish and stronger-than-PLA toughness on common FDM machines.

Investment Value

Great Value

Durability Index

Good for typical PLA applications—prints show strong layer adhesion and toughness; lifespan of filament depends on storage (vacuum/sealed recommended) and cardboard spool handling.

Key Buying Points

✓

Dimensional Accuracy: ±0.03 mm tolerance provides consistent extrusion and reduces nozzle jams during long prints, resulting in smoother surfaces and fewer failed layers in practice.

✓

PLA+ Formulation: Higher strength and improved toughness over standard PLA gives more durable functional parts while retaining easy printability for most FDM setups.

✓

Clog-Resistant Winding: Mechanical winding and manual inspection minimize overlaps and tangles — users report mostly hassle-free feeding and far fewer mid-print interruptions.

✓

Vacuum Sealed Packaging: Includes desiccant and vacuum bag to reduce moisture uptake during storage and out-of-box printing, improving layer adhesion and reducing popping/steam defects.

✓

Wide Compatibility: Works with a broad range of FDM printers and standard 1.75 mm extruders; recommended nozzle 210–230°C and bed 45–60°C makes it plug-and-play for many setups.

✓

Matte Surface Finish: Produces a low-gloss, paint-like matte finish that hides layer lines on aesthetic models, reducing post-processing time for display parts.

✓

Low Odor & Bio-Based: Corn-derived PLA base with low VOCs is friendlier for indoor printing and classroom use compared with solvent-heavy materials.

✓

Eco Spool: Cardboard spool reduces plastic waste and is lighter to handle; many users like the environmental trade-off without losing spool rigidity.

The Catch

!

Intermittent Spool Tangles: At least one verified batch arrived badly rolled, causing mid-print tangles and long print failures — check spool before starting long jobs.

!

Occasional Stringing: Some complex prints showed light stringing without aggressive retraction tuning, so fine-tuning retraction/temperature may be required for best results.

!

Strong Bed Adhesion: Several users reported very strong first-layer adhesion on some build surfaces, making parts difficult to remove without a scraper or temperature tweaks.

!

Cardboard Spool Limitations: Cardboard spools can deform or shred in humid storage or on high-speed spool holders; may require re-spooling to standard plastic reels for some setups.

!

Batch Variability Risk: Occasional notes of inconsistent rolling/feeding imply quality-control variance between spools — buy one test roll before committing to large runs.

Performance Scorecard

Performance 8.0
Quality 7.0
Value 8.0
Ease of use 7.0

Common Questions & Expert Insights

Q: Is this filament safe for indoor use and classrooms? ▼
Yes — it's low-odor and bio-based, making it suitable for indoor use. The PLA+ base is derived from plant starch (corn) and emits far fewer VOCs than ABS or solvent-based materials; still ensure basic ventilation for long print sessions.
Q: Will the spool reliably run through a 24+ hour print without tangling? ▼
Mostly yes, but inspect the spool first. The product uses mechanical winding and manual checks to limit tangles, and most users complete long prints trouble-free — however, there are documented cases of badly rolled spools, so confirm smooth feed before long jobs or keep a spare spool on hand.
Q: Is the filament prone to stringing on detailed prints? ▼
It can show light stringing on complex geometries unless tuned. PLA+ often requires dialing retraction and lowering temperature slightly (try 210–215°C and fine retraction steps) to eliminate strings; results vary by printer and nozzle size.
Q: What nozzle and bed temperatures should I use for best results? ▼
Use around 210–230°C for the nozzle and 45–60°C for the bed as a starting point. Start near 215°C and adjust in 5°C increments based on extrusion smoothness and stringing; bed temps in the 45–60°C range improve first-layer adhesion without excessive warping.
Q: Will this filament work with my common printers like Creality, Prusa, or Anycubic? ▼
Yes — it's broadly compatible with most 1.75 mm FDM printers. The manufacturer lists compatibility with Creality Ender/CR models, Prusa, Anycubic, MakerBot, and more; it uses standard 1.75 mm tolerances and common printing parameters.
Q: Can I print high-temperature functional parts or should I choose PETG/ABS instead? ▼
Prefer PETG/ABS for high-temperature or chemically resistant parts. PLA+ improves toughness over standard PLA but still lacks the heat and chemical resistance of PETG or ABS; use PLA+ for strength and finish, not for sustained heat loads.
Q: How should I store the spool after opening to maintain print quality? ▼
Keep it sealed with desiccant or in a dry box. The spool ships vacuum-sealed with a desiccant; once opened, place it in an airtight container with silica packs or a filament dry box to prevent moisture absorption that causes popping and poor layer adhesion.
Q: Does the filament need drying before printing out of the box? ▼
Usually no if the vacuum seal is intact, but yes if the spool has been exposed. New sealed rolls are typically ready to print; if the filament has been stored in humid conditions or you notice sizzle/poor extrusion, dry at ~40–50°C for a few hours in a filament dryer.
Q: How does this PLA+ compare to standard PLA in strength and finish? ▼
Stronger and tougher than standard PLA while retaining a matte finish. PLA+ formulations boost impact resistance and layer bonding compared with generic PLA, and this SKU also emphasizes a low-gloss surface that hides layer lines better for display pieces.
Q: Should I pick this over PETG for structural prints? ▼
Choose PETG for flexible strength and chemical resistance; choose this PLA+ for stiffness and superior surface finish. PLA+ offers better dimensional accuracy and a clean matte look, but PETG outperforms it in heat resistance and long-term load-bearing applications.

You May Also Like

Top-rated alternatives in 3D Printing & Scanning

View All →