Amazon's Choice

3DHoJor High-Speed PLA Filament 1.75mm 1kg — 300mm/s Review 2026: Is it Worth It?

4.2
2,543
50+ Bought last month
Current Price $34.70
3DHoJor High-Speed PLA Filament 1.75mm 1kg — 300mm/s
7.8
Expert Score

Quick Analysis Verdict

"A budget-focused, high-throughput PLA well suited for hobbyists and high-speed printers; avoid if you need perfect color matching or ultra-consistent industrial-grade melt behavior."

Value: 9.0/10 Ranked #1 in 3D Printing & Scanning
*Prices and availability are accurate as of Nov 20, 18:20 ET and are subject to change.

As an Amazon Associate we earn from qualifying purchases

Review Methodology

Why this analysis may help before you buy

4.2

Rating signal

We weigh star rating together with 2,543 visible reviews so a rating is not judged in isolation.

50+

Buyer momentum

Recent purchase activity and category badges help us identify products shoppers are actively considering.

7.8/10

RefreshBuy score

The score combines performance, quality, value, and ease-of-use signals for this category.

Decision Guide

Is 3DHoJor High-Speed PLA Filament 1.75mm 1kg — 300mm/s a good fit for you?

For shoppers comparing 3D Printing & Scanning products, this 3DHoJor option looks strongest on value with a 9.0/10 signal. The main area to double-check is performance, especially if that is your top priority.

Best For

High-volume prototyping and fast iteration on HS-capable FDM printers where cost and speed outweigh absolute color fidelity.

Evidence

strong review coverage, 4.2/5 rating, and 50+ recent monthly purchases.

Value Read

Value score 9.0/10 at $34.70 current tracked price.

Choose it if

You want a 3D Printing & Scanning pick where the strongest measurable signal is value and the current review base is large enough to compare with alternatives.

Compare alternatives if

Your buying decision depends mostly on performance, long-term durability, or a lower final checkout price after marketplace changes.

Before buying

Check both Amazon Canada and Amazon US from this detail page, then compare similar 3D Printing & Scanning products below before deciding.

Best Application

High-volume prototyping and fast iteration on HS-capable FDM printers where cost and speed outweigh absolute color fidelity.

Investment Value

Great Value

Durability Index

Moderate — PLA durability is typical; vacuum packaging preserves shelf life but prints are moisture-sensitive and require dry storage for long-term reliability.

Key Buying Points

✓

High-speed capability: Rated for up to 300mm/s and reported to deliver significant throughput gains on HS machines (users report faster print cycles when profiles are tuned).

✓

Tight dimensional control: Advertised ±0.03 mm diameter tolerance reduces extrusion fluctuation and improves part fit and repeatability in functional prints.

✓

Clog-reduction winding: Mechanical spooling and manual inspection minimize tangles and AMS feeding issues — multiple users reported smooth, jam-free runs on Bambu machines.

✓

Ready-to-print packaging: Vacuum-sealed with a desiccant sachet to limit moisture on arrival; enables immediate printing for most projects.

✓

Broad compatibility: Works with a wide set of FDM printers (Bambu, Prusa, Creality, AnkerMake, Voron, Raise3D) using standard PLA profiles with modest tuning.

✓

Low shrinkage, good surface finish: Formulation favors low deformation and an eggshell/dry finish suitable for prototypes and visual parts.

✓

Strong price-to-performance: Consistently high user scores for cost-effectiveness — a practical choice for volume prototyping and hobby use.

The Catch

!

Inconsistent melt behavior reported: Some users experienced slow melting, under-extrusion and visible air bubbles that required slower profiles or altered temperatures.

!

First-layer adhesion issues on textured glass: Several cases required adhesion aids (Magigoo) or adjusted first-layer settings to avoid lift.

!

Color and finish variance: Shade and surface sheen can vary between spools, so it’s not ideal for color-critical or showroom prints.

!

QC variability: While many spools work flawlessly, a minority show bubbles or weak zones out of the bag — inspect before large runs.

!

Basic cost-saving packaging: Cardboard spool and simple bagging keep price down but demand careful long-term storage to prevent moisture uptake.

Performance Scorecard

Performance 7.0
Quality 7.0
Value 9.0
Ease of use 8.0

Common Questions & Expert Insights

Q: Will this filament clog my extruder? ▼
Generally no — most users run it clog-free, but exceptions occur. Mechanical winding and manual QC reduce tangles, and many report smooth AMS and direct-drive feeding; however, some buyers have seen under-extrusion and bubble-related flow problems that require slower profiles, adjusted temperatures, or drying before use.
Q: Is the diameter consistency good enough for precision prints? ▼
Yes — the advertised ±0.03 mm tolerance is adequate for typical FDM precision needs. That level of dimensional control helps stabilize extrusion and improves dimensional repeatability for jigs, fixtures, and functional parts, though occasional QC outliers have been reported.
Q: Are there any toxicity or safety concerns printing this PLA? ▼
No major toxicity concerns — it is standard polylactic acid. PLA emits lower odor and fewer problematic VOCs than many other materials but still produces ultrafine particles; print in ventilated spaces and follow normal safety best practices.
Q: Can I reliably print at 300mm/s as advertised? ▼
Yes, but only on high-speed, properly tuned printers. Achieving 300mm/s requires a hotend capable of high melt throughput, tuned retraction and acceleration, and strong cooling; on many consumer printers you’ll achieve better quality at reduced speeds.
Q: Will this filament work in Bambu Lab AMS systems without issues? ▼
Yes — multiple users confirmed successful AMS feeding. The mechanical winding and standard spool layout are compatible with AMS units, though ensure the spool hole and hub alignment match your AMS adapter.
Q: What nozzle and bed temperatures should I start with? ▼
Use 190–230°C nozzle and 45–60°C bed as a starting point (215°C recommended). Start at the recommended center value, tune flow and first-layer speed, and use full part cooling for the best surface finish.
Q: How should I store unused spools to keep print quality? ▼
Keep unused spools vacuum-sealed or in a dry box with fresh desiccant. PLA absorbs moisture which causes bubbles and poor layer finish; reseal the bag or use airtight storage to preserve quality.
Q: Does this PLA need drying before use? ▼
Not usually if unopened; dry if you observe bubbling or hiss. If prints show micro-bubbles, loss of adhesion or poor flow, drying at low heat (40–45°C) for a few hours typically restores performance.
Q: How does 3DHoJor PLA compare to Bambu Lab branded PLA? ▼
Comparable print quality at a lower price, with slightly more QC variance. Many users get similar surface finish and feed reliability, but branded filaments may offer tighter color control and more consistent spool-to-spool uniformity.
Q: Is this better than generic discount PLA? ▼
Yes — it offers better winding, dimensional control and packaging than the cheapest no-name spools. The mechanical winding and desiccant reduce tangles and moisture problems common with ultra-low-cost alternatives, delivering more reliable prints for most users.

You May Also Like

Top-rated alternatives in 3D Printing & Scanning

View All →