Amazon's Choice

3DHoJor PLA 1.75mm High-Speed 1kg Filament (Cold White) Review 2026: Is it Worth It?

4.2
2,507
100+ Bought last month
Current Price $14.63
3DHoJor PLA 1.75mm High-Speed 1kg Filament (Cold White)
7.5
Expert Score

Quick Analysis Verdict

"Good for hobbyists and makers wanting an affordable, high-speed PLA with reliable diameter control; not for users needing heat-resistant, flexible, or certified specialty filaments."

Value: 8.0/10 Ranked #1 in 3D Printing & Scanning
*Prices and availability are accurate as of Nov 20, 18:10 ET and are subject to change.

As an Amazon Associate we earn from qualifying purchases

Review Methodology

Why this analysis may help before you buy

4.2

Rating signal

We weigh star rating together with 2,507 visible reviews so a rating is not judged in isolation.

100+

Buyer momentum

Recent purchase activity and category badges help us identify products shoppers are actively considering.

7.5/10

RefreshBuy score

The score combines performance, quality, value, and ease-of-use signals for this category.

Decision Guide

Is 3DHoJor PLA 1.75mm High-Speed 1kg Filament (Cold White) a good fit for you?

For shoppers comparing 3D Printing & Scanning products, this 3DHoJor option looks strongest on value with a 8.0/10 signal. The main area to double-check is performance, especially if that is your top priority.

Best For

Fast, visually detailed consumer prints and prototypes on a well-tuned FDM machine where print speed and dimensional consistency matter.

Evidence

strong review coverage, 4.2/5 rating, and 100+ recent monthly purchases.

Value Read

Value score 8.0/10 at $14.63 current tracked price.

Choose it if

You want a 3D Printing & Scanning pick where the strongest measurable signal is value and the current review base is large enough to compare with alternatives.

Compare alternatives if

Your buying decision depends mostly on performance, long-term durability, or a lower final checkout price after marketplace changes.

Before buying

Check both Amazon Canada and Amazon US from this detail page, then compare similar 3D Printing & Scanning products below before deciding.

Best Application

Fast, visually detailed consumer prints and prototypes on a well-tuned FDM machine where print speed and dimensional consistency matter.

Investment Value

Great Value

Durability Index

Medium — PLA itself is stable for years if stored dry, but cardboard spools and improper storage can reduce usable lifespan; keep sealed or in a dry box.

Key Buying Points

✓

High-speed capable: Rated for up to 300mm/s and performs well on tuned high-flow hotends, letting you complete prints much faster on capable machines.

✓

Tight dimensional control: Manufacturer lists ±0.03mm tolerance, which produces consistent layer lines and reduces extrusion compensation for most FDM printers.

✓

Clog-resistant winding: Full mechanical winding plus manual inspection reduces tangles and unexpected jams, improving long print success rates.

✓

Dry-packaged supply chain: Shipped in a vacuum bag with desiccant to limit moisture uptake and bubbling during first-use prints.

✓

Broad compatibility: Works with common FDM models (Prusa, Creality, Bambu, AnkerMake, Raise3D, Voron), so you can reuse profiles with minimal tuning.

✓

Easy baseline settings: Recommended range 190–230°C (215°C suggested), bed 45–60°C and 100% part cooling — quick to dial in for clean overhangs and detail.

✓

Sustainable spool choice: Supplied on a recycled cardboard spool which reduces plastic waste and can be easier to store or recycle.

The Catch

!

Cardboard spool durability: The recycled cardboard spool can deform if exposed to moisture or rough handling, leading to uneven feeding on some printers.

!

High-speed caveat: Achieving 300mm/s requires a high-flow hotend, sturdy motion system, and tuned slicer settings — stock machines may produce underextrusion or ringing.

!

PLA limitations: Standard PLA lacks heat and impact resistance expected for functional parts, so it fails for high-temp or mechanically demanding applications.

!

Color and finish variance: 'Cold White' shade and surface gloss can vary between batches; color-critical projects may require pre-testing.

!

Moisture sensitivity in long-term storage: If vacuum seal is compromised and filament absorbs humidity, prints can show popping, stringing, or surface blemishes.

Performance Scorecard

Performance 7.0
Quality 7.0
Value 8.0
Ease of use 8.0

Common Questions & Expert Insights

Q: Will this PLA survive being left inside a hot car or near a heated enclosure? ▼
No — PLA softens and deforms at modest temperatures. PLA's glass transition is low compared with engineering plastics; if parts are exposed to sustained heat (sun, hot car, heated enclosure without cooling), they will warp or lose dimensional stability. Choose PETG, ASA, or ABS for higher-temperature applications.
Q: Can I use this filament for functional parts that need impact resistance or flexibility? ▼
No — standard PLA is relatively rigid and can be brittle. For parts that need flexibility or high impact resistance (hinges, wearable items, bumpers), consider TPU for flexibility or PETG/ABS for better toughness.
Q: Will this filament clog my hotend or jam in a Bowden setup at high speeds? ▼
Possibly — clogging depends on your extrusion system and tuning, not just the filament. 3DHoJor's winding reduces tangles, but high-speed printing stresses hotend thermal stability and extrusion; use hardened nozzles, stable hotend temperatures, and larger nozzle diameters or tuned flow settings for Bowden setups.
Q: Is this filament compatible with Creality Ender 3 and similar printers? ▼
Yes — it is broadly compatible with Ender 3-style FDM machines. The filament is 1.75mm with ±0.03mm tolerance, and recommended print temperatures fall within common Ender 3 ranges; you may only need minor flow and retraction tuning.
Q: Can I realistically print at 300mm/s on printers like Bambu Lab or AnkerMake M5? ▼
Yes on high-performance machines, but not on all printers. 300mm/s is achievable on high-flow hotends and rigid motion systems (e.g., CoreXY with tuned acceleration). On budget Cartesian printers you'll need to lower speeds to avoid ringing and underextrusion.
Q: What nozzle size and slicer settings work best for this filament? ▼
A standard 0.4mm nozzle works; larger nozzles help at higher speeds. For faster printing, increase nozzle diameter and line width, raise extrusion temperature within the recommended range, and tune acceleration/jerk and flow rate to maintain consistent extrusion.
Q: How should I store unused spools to prevent moisture problems? ▼
Keep spools vacuum-sealed or in a dry box with fresh desiccant. PLA absorbs moisture slowly; proper storage prevents popping, bubbling, and increased stringing. For long-term storage, use airtight containers and silica gel packs.
Q: When should I replace or recharge the desiccant included with the spool? ▼
Replace or recharge when prints show bubbles, rough surface, or audible popping during extrusion. Desiccant saturation is evident when filament feels slightly spongy or produces steam-like bubbles; re-dry filament in an oven or filament dryer if necessary.
Q: How does 3DHoJor PLA compare to premium brands like Prusament in accuracy? ▼
Comparable dimensional control but generally less spool polish and batch consistency. 3DHoJor advertises tight tolerances and delivers consistent diameters for most users, but premium manufacturers often provide stricter QA, traceability, and spot-on color matching.
Q: Is this PLA a better choice than PETG for cosmetic models and fine detail? ▼
Yes for fine detail and crisp surface finish; PETG is better for strength and chemical resistance. PLA prints with lower warping and finer detail at lower temperatures, giving a glossier, cleaner finish. Use PETG if you need more toughness or temperature resistance.

You May Also Like

Top-rated alternatives in 3D Printing & Scanning

View All →