Amazon's Choice

Deeplee PLA+ 1.75mm 2KG 3D Printer Filament (White) Review 2026: Is it Worth It?

4.4
986
50+ Bought last month
Current Price $33.99
Deeplee PLA+ 1.75mm 2KG 3D Printer Filament (White)
7.5
Expert Score

Quick Analysis Verdict

"A cost-effective PLA+ spool for hobbyists and makers who need tougher-than-standard PLA for functional and decorative FDM prints; not for high-temperature or certified food-contact parts."

Value: 8.0/10 Ranked #1 in 3D Printing & Scanning
*Prices and availability are accurate as of Nov 20, 17:35 ET and are subject to change.

As an Amazon Associate we earn from qualifying purchases

Review Methodology

Why this analysis may help before you buy

4.4

Rating signal

We weigh star rating together with 986 visible reviews so a rating is not judged in isolation.

50+

Buyer momentum

Recent purchase activity and category badges help us identify products shoppers are actively considering.

7.5/10

RefreshBuy score

The score combines performance, quality, value, and ease-of-use signals for this category.

Decision Guide

Is Deeplee PLA+ 1.75mm 2KG 3D Printer Filament (White) a good fit for you?

For shoppers comparing 3D Printing & Scanning products, this Deeplee option looks strongest on value with a 8.0/10 signal. The main area to double-check is performance, especially if that is your top priority.

Best For

Printing functional consumer prototypes and decorative models that require better toughness than standard PLA while staying within typical desktop FDM printing constraints.

Evidence

limited-but-useful review coverage, 4.4/5 rating, and 50+ recent monthly purchases.

Value Read

Value score 8.0/10 at $33.99 current tracked price.

Choose it if

You want a 3D Printing & Scanning pick where the strongest measurable signal is value and the current review base is large enough to compare with alternatives.

Compare alternatives if

Your buying decision depends mostly on performance, long-term durability, or a lower final checkout price after marketplace changes.

Before buying

Check both Amazon Canada and Amazon US from this detail page, then compare similar 3D Printing & Scanning products below before deciding.

Best Application

Printing functional consumer prototypes and decorative models that require better toughness than standard PLA while staying within typical desktop FDM printing constraints.

Investment Value

Great Value

Durability Index

Good for months-to-years for indoor use when kept dry; prints retain dimensional stability for normal indoor service but will degrade under prolonged UV or heat exposure.

Key Buying Points

✓

Stronger Toughness: PLA+ formulation improves impact resistance over standard PLA, making printed parts less brittle for prototypes and light-duty functional components.

✓

Dimensional Accuracy: Manufacturer claims strict tolerance control (±0.02 mm), which promotes consistent feeding and higher first-layer success in real-world prints.

✓

FDM Compatibility: Designed for standard 1.75 mm FDM extruders—works with most consumer printers without hardware modification.

✓

Neatly Wound Spool: Mechanically wound rolls reduce tangles and mid-print failures compared with hand-wound alternatives.

✓

Improved Flow & Layer Bonding: Enhanced fluidity and pigment dispersion yield cleaner filament extrusion, stronger interlayer adhesion, and smoother surface finish.

✓

Vacuum-Sealed Packaging: Ships vacuum-sealed on a sturdy cardboard spool to reduce dust and initial moisture pickup during storage and transit.

✓

Color Consistency: High-quality pigments produce uniform white prints with minimal streaking in routine use.

✓

Printability: Lower tendency to clog and bubble in normal PLA temperature ranges, reducing troubleshooting time for typical hobby prints.

The Catch

!

Heat Sensitivity: PLA+ still has PLA-level glass transition limitations—prints can deform in hot or outdoor environments and are not a substitute for heat-resistant materials like PETG/ABS.

!

Moisture Absorption Risk: Despite vacuum packaging, exposed spool storage will absorb moisture over time; damp filament causes stringing and loss of strength unless dried.

!

Not Food-Safe: No food-contact certification; pigments and additives likely make it unsuitable for utensils or containers intended for food use.

!

Potential Tuning Required: Some printers may need adjustments to retraction and print temperatures compared to generic PLA to avoid over-extrusion or oozing.

!

Labeling vs. Packaged Weight: Product name lists 2KG filament but listed item weight is ~2.4 kg—expect spool and packaging to increase shipping weight and verify usable filament mass if precise material budgeting is required.

Performance Scorecard

Performance 7.0
Quality 7.0
Value 8.0
Ease of use 8.0

Common Questions & Expert Insights

Q: Is Deeplee PLA+ suitable for load-bearing mechanical parts? ▼
Yes, for light to moderate load-bearing parts. PLA+ increases toughness compared with standard PLA and reduces brittleness, making it acceptable for clips, mounts, and prototypes under modest stress—however, for high-impact or long-term structural parts choose PETG, nylon, or reinforced materials and validate with mechanical testing.
Q: Can I use this filament for outdoor parts exposed to sun and heat? ▼
No, it is not recommended for prolonged outdoor or high-heat exposure. PLA-based materials (including PLA+) have limited heat and UV resistance; parts exposed to direct sunlight or temperatures above PLA's glass transition will soften and deform—use UV-stable, heat-resistant filaments for outdoor applications.
Q: Is Deeplee PLA+ food-safe for printing utensils or containers? ▼
No, it should not be assumed food-safe. The filament has no food-contact certifications and pigments/additives can leach; even a 'food-safe' polymer requires certified manufacturing and smooth post-processing to be considered for food use.
Q: Will this filament work with my FDM 3D printer? ▼
Yes, it is compatible with standard 1.75 mm FDM extruders. Use the printer's PLA/PLA+ nozzle path and ensure the extruder filament path and spool holder support the heavier 2 kg spool; check spool hub dimensions for your printer's reel mount.
Q: What print temperature should I start with for Deeplee PLA+? ▼
Start in the typical PLA+ temperature window and fine-tune from there. Begin around the lower-to-mid PLA+ range recommended by similar PLA+ materials, then adjust in 5°C increments to optimize layer adhesion and surface finish; also set a heated bed (if available) to prevent first-layer warping.
Q: Do I need a hardened nozzle to print this filament? ▼
No, a standard brass nozzle is generally fine. Deeplee PLA+ is not inherently abrasive; however, if you use abrasive colorants or composite blends regularly, a hardened or plated nozzle will extend service life—otherwise a standard nozzle balances cost and performance.
Q: How should I store the filament after opening? ▼
Keep it dry and sealed with desiccant. Transfer the opened spool to an airtight container with silica gel or use a filament dry box; storing in ambient humidity will degrade print quality over weeks-to-months due to moisture absorption.
Q: Does this filament need drying before printing? ▼
Possibly—dry if it shows moisture signs. If you observe increased stringing, popping noises, or matte/foamy surfaces, dry the filament at a low controlled temperature (oven or filament dryer) for several hours to restore print behavior.
Q: How does Deeplee PLA+ compare to standard PLA? ▼
PLA+ offers improved toughness and reduced brittleness over standard PLA. Expect better impact resistance and slightly better layer bonding while retaining PLA's ease of printing; thermal limits remain similar, so you gain toughness without heat-resistance advantages.
Q: Is PLA+ a better choice than PETG for functional parts? ▼
Not always—PETG often outperforms PLA+ for heat and impact resistance. PLA+ can be easier to print and produce finer surface detail, but PETG generally offers superior toughness at elevated temperatures and better chemical resistance, so choose based on the part's end-use conditions.

You May Also Like

Top-rated alternatives in 3D Printing & Scanning

View All →